Boiler installation in Kirkby-in-Ashfield

Kirkby-in-Ashfield was built for the collieries and the housing still shows it. The terraces around Kirkby Cross, Portland and Nuncargate are narrow, deep properties where the original heating was a back boiler behind the front-room fire, and a surprising number are still on one. Off Kingsway and Diamond Avenue the inter-war and post-war semis run open-vented systems with a cylinder upstairs and a tank in the loft. What sets Kirkby apart from the flatter towns we cover is the ground: the land rises sharply towards The Summit, and on the steeper plots the condensate fall to a drain is genuinely the constraint that decides where a boiler can go. It is the first thing we check here and the last thing most quotes mention.

What makes a Kirkby-in-Ashfield installation different

• Gradients and condensate drainage

  A condensing boiler produces acidic water that has to run continuously downhill to a drain. On the sloping plots around The Summit and the upper end of Lowmoor Road the obvious external route often has nowhere to fall to, which means either an internal run to a waste pipe or a purpose-built soakaway. Getting that wrong is why some installations freeze and lock out every January.

• Narrow miners' terraces

  The Portland and Nuncargate terraces have single-width frontages, on-street permit parking and party walls close enough that a standard horizontal flue may not clear the boundary. We check the terminal position and the parking situation before quoting, because both change how long the job takes.

• Scale on combi heat exchangers

  Severn Trent supplies moderately hard water here and it shows up as weakening hot-water flow three or four years into a combi's life. On Kirkby installations we fit scale protection alongside the magnetic filter as standard rather than selling it as an upgrade.

Jobs we do most often in Kirkby-in-Ashfield

• Kirkby Cross — back boiler to kitchen combi

  Miners' terrace with the appliance behind the front-room fire. Back boiler and fire out, opening made good, A-rated combi hung in the kitchen with a new gas run and a flue terminal positioned to clear the party boundary.

• Kingsway — open-vented conversion

  Inter-war semi converted to a sealed system. Cylinder and loft tanks removed, radiators power flushed, magnetic filter and smart controls fitted, airing cupboard handed back to the customer.

• The Summit — relocation for condensate fall

  Sloping plot where the existing boiler position had no viable condensate route. Appliance relocated to the utility, condensate run internally to the kitchen waste, and the flue rerouted accordingly.

For how we approach installations generally — warranties, the survey, what is included in the price — see our boiler installation page. For servicing, landlord certificates and commercial work in the area, seeeverything we do in Kirkby-in-Ashfield.